Incubus - cccam

[marto]

Първоначално написано от stelibg

Благодаря за отговорите. При първа възможност ще тествам. Имам и друг "проблем". Не мога да подменя incubuscamd.sh4 (ver 0.85) с incubuscamd.sh4 (ver 0.88), защото ми дава "Read only file system). Пробвах през telnet да сменя атрибутите на файла (chmod 777) при спрян емулатор, но не се получава. С NLB 9580 имидж съм.

Сложи новия инкубус във /var/bin и рестартирай кама. Ще се стартира новата версия 0.88

[stelibg]

Не се получава ;(. Смених версията на Инкубуса до 0.88, дописах редовете в Прио файла - нищо. Сега остава да сменя CCCam servera ot 2.09 до по-нова версия.

[alfamobil]

Сложи си един sifteam R9580 с incubus 0.88 и сложи редовете в приото и гаранция че няма да имаш проблеми. За мен sifteam си е най добрия имидж за ипбокс с най добрата картина и перфектно стабилен.

[ko2000]

Картината със Сифтийм имидж на IPbox наистина е най-добра. Преминах през НЛБ, Е1, Е2 - качеството на картината е доста по-ниско в сравнение със Сифтийм имиджа.

[rumpenshtilk]

Потвърждавам думите на колегата ko2000, наистина със Sifteam имидж и картина, и всичко е по-добро от другите.

[stelibg]

Пак не става. Sifteam 9580 и incubuscamd 0.88, дописани редовете в *.prio файла и не иска. Сигурно ми е грешен конфиг файла. Ето го и него:
#########################################
#####################################
# incubusCamd configuration file #
# All configuration options in this file observe the same format: #
# = #
# #
# Each section are [::] like. #
# #
# No matter about white spaces on any place or UNIX/DOS style files #
############################################
##################################

########################### general configuration ##########
##################
[General]
# Enable (1) or disable (0) background execution
# 0 - Off
# 1 - On
background_execution=1

# This sets the level of console output for debugging:
# 0 - No debug messages, 1 - First level debug messages, 2 - Second level debug messages,
# 3 - Print all debug messages
debug_level=1

# This option enables (1) or disables (0) the writing of debug information to the
# console.
log_to_console=1

# This option enables (1) or disables (0) the writing of console output to a log file
log_to_file=0

# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
logfile_name=/var/bin/incubusCamd.log

# Used to activate on-screen messages. Username and password required if
# HTTP authentication is enabled on enigma.
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=1
on_screen_messages_wait_for_key_update=0
on_screen_messages_ecm=0
on_screen_messages_emm=0

#When activated, camd will listen on the specified port for connections. All
#log ac****ty will be broadcast in real-time to connected clients.
console_logs_broadcast=1
console_logs_broadcast_port=666

############################ caid configuration #
#############################
#
# First of all the cam use the incubusCamd.prio file, then use the
# configuration below.
# Sections are defined by the value of the CaID.
# You can choose the default ecm table used by the codify, this means that
# you can choose the first byte of the raw ecm that is downloaded from sat.
# If you don't know what value to insert, use "80". (all value are in hex)
# Default value for ecm_table is 0x80.
# The option "priority" tells if one caid should be selected before try
# another one with a priority value greater.
# The less is the value the greatest is the priority. Choose from "0" to any value,
# priority value is decimal.
#

#[CaID:0100]
#ecm_table=80
#priority=1

#[CaID:0500]
#ecm_table=80
#priority=1

#[CaID:0600]
#ecm_table=80
#priority=1

#[CaID:0919]
#ecm_table=80
#priority=1

#[CaID:093B]
#ecm_table=80
#priority=1

#[CaID:0B00]
#ecm_table=80
#priority=1

#[CaID:0D00]
#ecm_table=80
#priority=1

#[CaID:1700]
#ecm_table=80
#priority=1

#[CaID:1800]
#ecm_table=80
#priority=1

#[CaID:2600]
#ecm_table=80
#priority=1

########################### provider configuration ##########
#################
#
# All parameters are in hexadecimal notation.
# Each section is defined by the provider id value.
# If you don't know the provider id value then use the provider id "000000" and ca id "0000".
# On provider 000000 caid 0000 goes all provider wich are not declared. If the provider
# is declared then the cam will use the provider founded.
#

#[Prov:000501:CaID:1833]
[Prov:FF00]
# ----------------------------------------------------------------------------
# Decoder type indicates whether the cam will attempt to decode this provider
# in software, or through a card-server. Supported values are:
#
# 0 - Use internal softcams.
# 1 - Connect to a card sharing protocol card-server.
decoder_type=1

# URL of card-server to use, formats are as follows:
#
# newcamd://:@:/
# aroureos://@:
# radegast://@:
#
# Example:
# newcamd://foo:bar@192.168.0.100:12345/0CE3476FF2E1C9D9A0A109B371E3
#
# Multiple card-server url's can be specified for server fail-over.
# If the emu fails to connect or fails to get valid CW's, it will try to
# connect to other servers in a round-robin fashion.
#
# Up to 16 servers can be added from index 0 to 15.
#
# You can choose also to select a cccam or gbox server, but they must be declared
# in the "servers configuration" section ( [Servers] ).
# e.g. : if you want to use a cccam server for a provider you must put it on
# the parameter card_server_url_0=cccam://
# NO MATTER the value after the double slash because server configuration is
# made in the section [Servers].
# Only for newcamd, radegast and aroureos is usefull to put correct connection
# parameters because they are provider dependent.
#
#
# Example i want to use mine card into the slot with newcs for prov 0501 on nagra3 (caid 1833)
card_server_url_0=newcamd://usernameassword@192.168.0.100:10550/0102030405060708091011121314

[Prov:000000:CaID:0000]
# this provider is a stand-in for all cards and all caid not declared previously
#
# For example I choose to use cccam protocol on all other provider.
#
decoder_type=1
card_server_url_0=cccam://

########################### servers configuration ############################
[Servers]
#
# This is the section for the multi-server configuration.
#
# URL of card-server to use, formats are as follows:
#
# cccam://:@://[EMM]
# where should assume value
#"yes" (without quotes, if you like to r
#eceive emus data shared by the server) or "no" (this is assumed by default)
#
# gbox://::@::/[EMM]
#
# NOTE: The "EMM" suffix is optional and tells the card-server client whether
# to send EMM's to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# NOTE 2: The "card_server_url" is not the same as previously declared in the prov/caid section
# use how many server as you like
#
card_server_url=cccam://ipbox:ipbox@192.168.2.104:11500
#card_server_url=cccam://:@:
#card_server_url=gbox://::@::
#card_server_url=cccam://:@:
#card_server_url=gbox://::@::

########################### CaIDs tunneling configuration #######
#####################
[CaIDTunnel]
#
# All values are in hex notation
# In this file you can configure what CAIDs/PIDs incubusCamd should tunnel to another CAID
#
# situation 1: this caid, all idents, on all channels will use the tunnel_caid
# caid:tunnel_caid
#
# situation 2: this caid/ident pair will use the tunnel_caid
# caid:tunnel_caid:ident
#
# situation 3: this caid/ident pair, on channel 'sid' will use the tunnel_caid
# caid:tunnel_caid:ident:sid
#
# i.e:
# 1833:1702:000000:0082 # this one should tunnel premiereHD nagra3 into betacrypt cards
# 1833:1702:000000:0081 # this one should tunnel premiereHD nagra3 into betacrypt cards
#

[alfamobil]

[General]
background_execution=1
debug_level=1
log_to_console=0
log_to_file=0
logfile_name=/var/bin/incubusCamd.log
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=sifteam
on_screen_messages_key_update=1
on_screen_messages_wait_for_key_update=1
on_screen_messages_ecm=1
on_screen_messages_emm=1
console_logs_broadcast=0
console_logs_broadcast_port=666


[Prov:000000:CaID:0000]
decoder_type=1
card_server_url_0=cccam://

[Servers]
card_server_url=cccam://userass@192.168.0.x:12000/no/yes


Ето сложи този конфиг само си опиши сървъра

[stelibg]

НЕ СТАВА! Не помогна смяната на имиджа със СифТиим, нито нов конфигурационен файл, нито дописването в *.prio файла. Започвам да си мисля, че има нещо сбъркано в настройката на транспондера. Импортнал съм ги от http://satellites-xml.eu/.

[alfamobil]

След като сложи конфига който ти постнах и прио в /var/bin/ кое не ти излиза само ПРО-БГ ли? И още нещо какво ти изписва на твто като си на този канал и натиснеш жълт бутон?

[stelibg]

Само Про-Бг не излиза. Жълтия бутон не съм натискал. В СифТиим той за какво е? ECM info li?